Setup Guide

1-2 Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide

$$
Before you begin installing your PowerVault system in the rack, carefully read the
safety precautions at the front of this guide and tool requirements in the following
subsection.

To install the rack kit in the rack, you will need a #2 Phillips-head screwdriver.
support rails (1 pair)
mounting ears (1 pair)
adjustable rail-mounting
flanges (1 pair)
10-32 x 1/2-inch Phillips
pan-head screws (4)
6-32 x 3/8-inch Phillips
flat-head screws (4)
10-32 x 1/2-inch Phillips
flat-head screws (8)
conical metal washers (8)