User guide
support.dell.com Installing Drives 6-7
To install a SCSI hard-disk drive and carrier in a drive bay, perform the following steps.
(&)'
&&#)&)
)'*#
)'+
&'
1. If the drive bay is occupied by an empty carrier, remove the carrier from the drive
bay.
2. Carefully slide the replacement drive carrier into the bay (see Figure 6-6). When
the carrier is almost all the way into the bay, the carrier handle will flip up.
#$
3. Close the handle to draw the drive carrier into the bay and lock the drive in place.
When the controller recognizes the hard-disk drive, the drive online indicator
turns on.
4. Replace the lock bar in the lock position.
5. Use the key to lock the keylock.