User Manual

1-14 Rack Installation Guide
www.dell.com | support.dell.com
Figure 1-9. Installing the Rack Front Panel
Installing the System in the Rack
CAUTION: If you are installing more than one system, install the heaviest system
in the lowest available position in the rack.
CAUTION:
Never pull more than one component out of the rack at a time.
1
Lift the system into position in front of the mounting rails you installed in the rack
cabinet.
CAUTION: Because of the size and weight of the system, never attempt to install
the system in the rails by yourself.
2
Slide the system into the rack until the system front panel is against the vertical rails
(see Figure 1-10).
3 Tighten the captive thumbscrews on each side of the system’s front panel.
light pipes (5)
screws (14)
front panel