Owner manual

1-10 Rack-to-Tower Conversion Guide
www.dell.com | support.dell.com
3 To install the bezel:
a Position the bezel so it is perpendicular to the system.
b Install the two captive thumbscrews in their holes at the bottom of the front
panel.
c Reinstall the hard drives and power and cooling modules, if they were removed
(see the Installation and Troubleshooting Guide for instructions).
d Close the bezel.
See the Installation and Troubleshooting Guide for information about installing and
configuring your system.
Figure 1-5. Installing the Tower Front Bezel
thumbscrew
bezel
2H982bk1.book Page 10 Monday, November 5, 2001 10:12 AM