Users Guide

support.dell.com PowerVault 51F Comandos 4-5
switch:admin> agtcfgSet
Customizing MIB-II system variables ...
At each prompt, do one of the following:
o <Return> to accept current value,
o enter the appropriate new value,
o <Control-D> to skip the rest of configuration, or
o <Control-C> to cancel any change.
To correct any input mistake:
<Backspace> erases the previous character,
<Control-U> erases the whole line,
sysDescr: [Interruptor FC.]
sysLocation: [End User Premise]
sysContact: [Field Support.]
swEvevtTrapLevel: (0..5) [3]
authTrapsEnabled (true, t, false, f): [true]
SNMP community and trap recipient configuration:
Community(rw): [Secret C0de]
Trap Recipient’s IP address in dot notation: [192.168.1.51]
Community(rw): [OrigEquipMfr]
Trap Recipient’s IP address in dot notation: [192.168.1.26]
Community(rw): [private]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
192.168.64.68
Community(ro): [public]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
Community(ro): [common]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
Community(ro): [FibreChannel]
Trap Recipient’s IP address in dot notation: [0.0.0.0]
agtcfgShow
El comando
agtcfgShow
presenta la configuración actual del agente SNMP. La
Tabla 4-2 describe los campos.
aliasShow
Eel comando
aliasShow
presenta información de servidor de alias local, como se
muestra en el ejemplo siguiente. Los campos de comando se describen en la
Tabla 4-3. Si no hay grupo de alias local, se presenta un mensaje que lo explica.
De lo
contrario, muestra al usuario el número de entradas de grupo de alias creado con el
título:
The Local Alias Server has n entries
Alias ID Creator Token [rb, type, grptype, qlfr] Member List