Users Guide

1-4 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
Before You Begin
Before you install your PowerVault 51F switch in the rack, read the safety information
at the front of this guide. Also, see Figure 1-2 for the rack kit contents.
Recommended Tool
To install the PowerVault 51F switch, use a #2 Phillips-head screwdriver.
Installing the Switch
To install the switch in the rack, perform the following tasks. The subsections that
follow include instructions for performing these tasks.
1. Remove the doors from the rack if necessary.
2. Prepare the switch for mounting.
3. Install the outer slides.
4. Install the switch assembly in the rack.
5. Install the cable-management arm and route the cables.
6. Replace the rack doors if you removed them.