Users Guide

support.dell.com PowerVault 51F Commands 4-27
psShow
The following example shows the
psShow
command screen, which displays the
power supply status and manufacture information. The format of the display varies
according to the switch model and number of power supplies present.
The status of each supply is shown in Table 4-15.
After the status line, a power supply identification line may be shown. If present, this
line contains manufacture date, part numbers, serial numbers, and other information.
open loop_open: the number of times FL_Port entered the OPEN
state.
transfer loop_transfer: the number of times FL_Port entered the TRANS-
FER state.
opened FL_Port opened: the number of times FL_Port entered the
OPENED state.
starve_stop Loop tenancies stopped due to starvation.
fl_tenancy Number of times FL_Port has the loop tenancy.
nl_tenancy Number of times NL_Port has the loop tenancy.
frame_nozone Number of frames rejected due to zone protection.
Table 4-15. Power Supply Status
Status Description
OK Power supply present and functioning correctly.
Absent Power supply not present.
Faulty Power supply is present but faulty (no power cable,
power switch turned off, fuse blown, or other internal
error).
Table 4-14. portStatsShow Command Field Descriptions
(continued)
Field Description
switch:admin> psShow
Power Supply 1 is OK
9835,DH000000208,60-0000734-01, A,00001, E108302A,01, 803
Power Supply 2 is OK
9839,DH000000253,60-0000734-01, A,00001, E108302A,01, 803