Users Guide

4-34 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
fspfShow
The following example shows the
fspfShow
command screen, which displays Fibre
Channel Shortest Path First (FSPF) information. The fields are described in Table 4-19.
Table 4-18. bcastShow Bitmap Field Descriptions
Bitmap Field Description
Group The multicast group.
Member Ports All ports currently transmitting or receiving broadcast frames.
Member ISL
Ports
Ports that belong to the interswitch broadcast distribution tree,
as selected by the dynamic broadcast path selection protocol.
These are all E_Ports, and this set is a subset of m_port. Broad-
cast frames use these ports to reach all fabric switches and to
enter into the switch.
Some of the E_Ports on a switch may not be part of this set,
since the broadcast paths must constitute a tree.
Static ISL
Ports
Ports that belong to the interswitch broadcast distribution tree,
as configured through the shell. This field is normally
0x00000000.
switch:admin> fspfShow
version = 2
domainID = 1
isl_ports = 0x00000000
minLSArrival = 3
minLSInterval = 5
LSoriginCount = 0
startTime = 18656
fspfQ = 0x10fa44e0
fabP = 0x10fa4d60
agingTID = 0x10f7e4c0
agingTo = 10000
lsrDlyTID = 0x10f6e4f0
lsrDelayTo = 5000
lsrDelayCount = 0
ddb_sem = 0x10fa44b0
fabP:
event_sch = 0x0
lsrRefreshCnt = 0