Administrator Guide

support.dell.com Introduction 1-7
Part 3: Configuring Systems With a PowerVault Kick-Start
Diskette
After you have created configuration files on a PowerVault Kick-Start diskette, you can
use the diskette to set up one or more systems:
1. Insert the configured PowerVault Kick-Start diskette into the diskette drive of the
first system you want to set up and turn on the system.
2. When the configuration is complete, the system automatically shuts down.
3. If you need to configure multiple systems, go to the next system and repeat the
procedures in parts 1 through 3.