Owner manual

Figure 1-2. VersaRails Rack Kit Contents
10-32 X 0.5-inch
flange-head
Phillips screw (8)
T
status indicator cable
Removing the Rack Doors
See the proeedures for removing doors in the doeumentation provided with your гаек
eabinet.
CAUTION: Because of the size and weight of the rack cabinet doors, never
attempt to remove or install them by yourself.
CAUTION: Store the two doors where they will not injure someone if the doors
accidently fall over.
Marking the Rack
You must allow 2 U (88 mm, or 3.5 inehes) of vertieal spaee for eaeh system you install in
the raek. Raek eabinets that meet EIA-310 standards have an alternating pattern of three
holes per raek unit with eenter-to-eenter hole spaeing (beginning at the top hole of a 1-U
spaee) of 15.9 mm, 15.9 mm, and 12.7 mm (0.625 ineh, 0.625 ineh, and 0.5 ineh) for the
front and baek vertieal rails (see
Figure 1-3). Raek eabinets may have round or square holes.
1-6 I Rack Installation Guide