Owner manual

+ Install the system status indieator eable plug into its eonneetor (see Figure 1-9).
5 Open the wire eovers on the eable-management arm by lifting the eenter of the wire
over the top of the embossed round button on the front of the forward part of the arm
and lifting the wire over the top of a similar round button on the baek part of the arm.
The wire eover swings open to enable eables to be routed within the arm.
6 Route the system status indieator end of the eable through the eable-management
arm, and install the indieator in its slot at the baek end of the eable-management arm
(see Figure 1-9).
Figure 1-9. Installing the Cable-Management Arm
Rack Installation Guide | 1-15