Reference Guide

Table 2-2
Command line switches for the Storage Provisioning Option
(continued)
DescriptionSwitchOperationFunction
Required.
Specifies the ID or the
name of the virtual disk on
the storage array.
-vi:virtual
disk ID
or
-vn:virtual
disk name
Waits for the present
operation to finish.
-w
Renames a virtual disk or
a storage array. Returns a
1 if the command succeeds
or a -1 if the command
fails. You must specify
either a storage array or a
virtual disk to rename; you
cannot specify both.
-o535Rename a virtual
disk or a storage
array
Required.
Specifies the ID or the
name of the storage array.
-si:storage
array ID
or
-sn:storage
array name
Required.
Specifies the ID or the
name of the virtual disk on
the storage array.
-vi:virtual
disk ID
or
-vn:virtual
disk name
Required.
Provides the new name for
the device.
-nn:new name
Runs a scan operation to
find new storage arrays,
virtual disks, or physical
disks.
No switch required.-o536Detect a new
storage array
23Installing and configuring Backup Exec by using the Storage Provisioning Option
About using the Backup Exec Command Line Applet with the Storage Provisioning Option