Owners Manual

Installing System Components 73

Figure 3-5. Installing a SATA Hard Drive Into a SATA Drive Carrier

Installing a SATA Hard Drive and Interposer Card Into a SATAu

Hard-Drive Carrier

NOTE: When you install a SATA hard drive into a SATAu drive carrier, you must

install an interposer card onto the back of the hard drive. The SATAu drive carrier is

labeled "SATAu" and also has marks indicating the SAS and SATA mounting screws.

1 Insert the SATA hard drive into the SATAu hard-drive carrier with the

connector end of the drive at the rear. See

Figure 3-6

1 screws (4) 2 SATA drive carrier

3 SATA hard drive

Book.book Page 73 Monday, September 14, 2009 12:57 PM