INTELLIGENT DISASTER RECOVERY DELL POWERVAULT DL 2000 POWERED BY SYMANTEC
Intelligent Disaster Recovery The PowerVault DL2000– Powered by Symantec Backup Exec offers the industry’s only fully integrated backup-to-disk solution with software factory installed. Dell and Symantec have codeveloped this offering to give you easier management capabilities of the backup-to-disk environment. It’s an ideal way for any IT department to achieve faster, more reliable backups and restores.
Intelligent Disaster Recovery The Intelligent Disaster Recovery Option saves recovery time by automating the traditional manual, error prone process. This option automates server recovery, reducing the time to recover and gets business back into production fast. Using either a CD-R/CD-RW or bootable tape, the Intelligent Disaster Recovery Option will quickly recover downed servers enabling restores from the last complete backup set including full, differential, incremental, and working set backups.
Intelligent Disaster Recovery 2. Enter the alternate location where a copy of the *.dr file will be stored, and then click “Next”. Best Practice: Symantec recommends that the alternate location be on another computer or on a different physical drive than the default location. 3. The IDR configuration is now complete. You are ready to run backups and create bootable media. Click “Finish”.
Intelligent Disaster Recovery The backup job status can be monitored from the Job Monitor tab on the Backup Exec interface. The backup job has completed successfully when the backup job appears under the Job History and is listed as Successful. Step 3: Preparing Disaster Recovery Media 1. From the Tools Menu, Select “Wizards” and then select the “Intelligent Disaster Recovery Preparation Wizard.” 2. Select “Next” to continue the wizard. 3.
Intelligent Disaster Recovery STEP 1: Boot the Failed System 1. Boot the failed system using the Bootable CD Image created as part of the disaster recovery preparation wizard. 2. 3. Once the system boots select the disaster recovery task to be performed: • Select “Automated Recovery” if the disaster recovery (.dr) file is available from Step 1 in the disaster recovery creation process. • Select “Manual Recovery” is the disaster recovery (.
Intelligent Disaster Recovery • • • Domain Name: User Name: Password: 12. A summary of the data sets and media is presented. Select “Next” to continue the restore. 13. Once the data has finished restoring, the disaster recovery process will be completed. If the restore was performed to a different system, it may be necessary to specify the correct hard drive to boot the operating system. This can be done by editing the BOOT.ini file.
Intelligent Disaster Recovery PROTECTING YOUR POWERVAULT DL2000WITH INTELLIGENT DISASTER RECOVERY Intelligent Disaster Recovery can be used to protect your PowerVault DL2000and minimize the amount of time required to restore the appliance in the event of a system failure. Full system backups as part of the IDR process protect all software components on the appliance including the Windows Operating System, Backup Exec, and all configuration information.
Intelligent Disaster Recovery SUMMARY The Intelligent Disaster Recovery Option is a key beneficial feature to routine backup procedures. IDR protects against systems disasters and reduces the time required to recover critical network systems by automating and integrating the disaster recovery process with backup and restore technology.
