Support Matrix

Supported storage enclosure rmware
When using MD1200/MD1220 Storage enclosures, Dell EMC recommends two Enclosure Management Modules (EMMs) when in a JBOD
environment directly connected to a server using a PERC controller. When connected to a RBOD MD3 array or daisy-chained to another
MD1200/MD1220, a dual-EMM conguration is required.
Both EMMs must be running the same rmware versions. EMMs do not automatically synchronize rmware versions, you must update
each EMM individually.
Table 2. Storage Enclosure Management Module Firmware Release History
Firmware Version Release Date Fixes and Enhancements
1.06, A01 4-Feb-16
• Optimize communication between
EMMs
• Improve two wire interface handling
• Modify SES Page 07 h response to
correct oversize page request boundary
case.
1.05, A00 14-Apr-14 DUP packaging change
1.01, A00 21-Feb-13
• Initial release
• Earliest required rmware version
3
6 Supported storage enclosure rmware