Owner's manual

Script Commands 119
Syntax
clear storageArray configuration (all |
volumeGroups)
Parameters
If you do not enter a parameter, this command removes all configuration
information for the storage array, except for the information related to
security and identification.
Clear Storage Array Event Log
This command clears the Major Event Log (MEL) for the storage array by
deleting the data in the MEL buffer.
NOTICE: As soon as you run this command, the existing MEL in the storage array is
deleted.
Syntax
clear storageArray eventLog
Parameters
None.
Clear Storage Array Firmware Pending Area
This command deletes a previously downloaded firmware image or
nonvolatile static random access memory (NVSRAM) values from the
pending area buffer.
NOTICE: As soon as you run this command, the contents of the existing pending
area in the storage array are deleted.
Parameter Description
all The setting to remove the entire configuration of the storage
array, including security and identity information. Removing all
configuration information returns the storage array to its initial
state.
volumeGroups The setting to remove the virtual disk configuration and the disk
group configuration. The rest of the configuration stays intact.