Owner's manual

150 Script Commands
Parameters
Download Storage Array Physical Disk Firmware
This command downloads firmware images to all physical disks in the storage
array.
Syntax
download storageArray physicalDiskFirmware file=
"
filename" [file=" filename2" ...file=" filenamen "]
Parameters
NOTE: When you run this command, you can download more than one firmware
image file to the physical disks in a storage array. The number of firmware image
files you can download depends on the storage array. The storage management
software returns an error if you attempt to download more firmware image files
than the storage array can accept.
NOTE: You can schedule downloads for multiple physical disks at the same time,
including multiple physical disks in a redundant disk group. Each firmware image
file contains information about the physical disk types on which the image runs. The
specified firmware images can be downloaded only to a compatible physical disk.
Use the download physicalDisk firmware command to download an image to a
specific physical disk.
Parameter Description
file File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the file name.
Parameter Description
file File path and name of the file that
contains the firmware image. You must
put quotation marks (" ") around the
firmware image file path and file name.