Owner's manual

158 Script Commands

NOTE: If the warningThresholdPercent parameter or the repositoryFullPolicy

parameter is not specified, the previously set values are used. If you use the

optional parameters, the re-create Snapshot will process each snapshot virtual

disk separately. If the same userLabel (name) is specified for more than one virtual

disk, the command fails. If no optional parameters are specified, the re-create

Snapshot will process the specified snapshot virtual disks as a batch, provided a

validation check of all of the virtual disks runs successfully. If successful, the

snapshots start the re-creation process and all of the affected virtual disks

(snapshot, source, and repository) are quiesced until the process is complete.

NOTE: If no optional parameters are specified, the recreate snapshot command

will process the specified snapshot virtual disks as a batch, provided a validation

check of all of the virtual disks runs successfully. If successful, the snapshots start

the re-creation process and all of the affected virtual disks (snapshot, source, and

repository) are quiesced until the process is complete.

NOTE: The Microsoft Virtual Shadow Copy Service (VSS) provider allows the

recreation of multiple snapshots simultaneously.

Remove Virtual Disk Copy

This command removes a virtual disk copy pair.

Syntax

remove virtualDiskCopy target [

targetName

] [source

[

sourceName

]]

Parameters

Parameter Description

target Name of the target virtual disk to remove. You must put

brackets ([ ]) around the target virtual disk name. If the target

virtual disk name has special characters, you must also put

quotation marks (" ") around the target virtual disk name.

source Name of the source virtual disk to remove. You must put

brackets ([ ]) around the source virtual disk name. If the

source virtual disk name has special characters, you must also

put quotation marks (" ") around the source virtual disk name.