Owner's manual

Script Commands 231
Stop Storage Array Blink
This command turns off the indicator LED on the storage array that were
turned on by the start storageArray blink command.
Syntax
stop storageArray blink
Parameters
None.
Example
-c "stop storageArray iscsiSession [5];"
Stop Storage Array Physical Disk Firmware Download
This command stops a firmware download to the physical disks in a storage
array that was started with the download storageArray physicalDiskFirmware
command. This command does not stop a firmware download that is already
in progress to a physical disk; however, this command stops all firmware
downloads to physical disks that are waiting for the download.
Syntax
stop storageArray physicalDiskFirmwareDownload
Parameters
None.
Stop Virtual Disk Copy
This command stops a virtual disk copy operation.
Syntax
stop virtualDiskCopy target [ targetName ] [source
[
sourceName ]]