Reference Guide
스냅샷 기능 사용 69
물리 디스크 수를 지정하여 스냅샷 가상 디스크 작성
이 create snapshotVirtualDisk 명령어 버전을 사용할 경우에는 스냅샷 저장
소 가상 디스크의 RAID 레벨과 물리 디스크 수를 지정해야 합니다. 이
create snapshotVirtualDisk 명령어 버전은 새 디스크 그룹을 작성합니다.
이 명령어가 올바르게 작동하려면 디스크 그룹에 할당되지 않은 물리 디스
크가 스토리지 배열에 있어야 합니다.
create snapshotVirtualDisk sourceVirtualDisk=
"sourceVirtualDiskName" [repositoryRAIDLevel=(0 |
1 | 5) repositoryPhysicalDiskCount=
numberOfPhysicalDisks physicalDiskType=(SAS |
SATA) userLabel="snapshotVirtualDiskName"
warningThresholdPercent=percentValue
repositoryPercentOfSource=percentValue
repositoryUserLabel="repositoryName"
repositoryFullPolicy=(failSourceWrites |
failSnapShot)] [enclosureLossProtect=(TRUE |
FALSE)]
주: 구성 정의에 필요한 경우 옵션 매개변수 중 하나 또는 모두를 사용할 수 있
지만 반드시 옵션 매개변수를 사용해야 하는 것은 아닙니다.
다음 예제는 사용자가 물리 디스크 수를 지정하는 명령어입니다.
client>smcli 123.45.67.89 -c "create
snapshotVirtualDisk sourceVirtualDisk=
\"Mars_Spirit_4\" repositoryRAIDLevel=5
repositoryPhysicalDiskCount=3;"
이 예제의 명령어는 3개의 물리 디스크로 구성된 새 스냅샷 저장소 가상 디
스크를 작성합니다. 3개의 물리 디스크는 RAID 레벨이 5인 새 디스크 그룹
을 구성합니다. 또한 이 명령어는 소스 가상 디스크의 스냅샷을 작성하면
서 기록 중 복사 작업을 시작합니다.
다음 예제는 이 명령어의 스크립트
파일 버전입니다.
create snapshotVirtualDisk sourceVirtualDisk=
"Mars_Spirit_4" repositoryRAIDLevel=5
repositoryPhysicalDiskCount=3;