Setup Guide

16 Getting Started With Your System
NOM Information (Mexico Only)
The following information is provided on the device described
in this document in compliance with the requirements of the
official Mexican standards (NOM):
Technical Specifications
Importer:
Model number: E03J and E04J
Supply voltage: 100–240 V CA
Frequency: 50/60 Hz
Current consumption: 8.6 A
Drives
PowerVault MD3200i Up to twelve 3.5-inch SAS hot-swappable hard
drives (3.0 Gbps and 6.0 Gbps)
PowerVault MD3220i Up to twenty four 2.5-inch SAS hot-swappable hard
drives (3.0 Gbps and 6.0 Gbps)
RAID Controller Modules
RAID controller modules
• One or two hot-swappable modules
with temperature sensors
• 2 GB of cache per controller
Back-Panel Connectors (Per RAID Controller Module)
iSCSI connectors Four 1 GB iSCSI IN connectors to connect hosts
SAS expansion connector One SAS OUT port for expansion to an additional
PowerVault MD1200 series enclosure.
NOTE: SAS connectors are SFF-8088 compliant.
Serial connector One 6-pin mini-DIN connector
NOTE: For technical support use only.