Users Guide

Figure 25. Discover Storage Arrays window
2. Enter the starting TCP/IP address of the IP range to discover storage arrays on.
3. Enter the ending TCP/IP address of the IP range to discover storage arrays on.
4. Click the Discover button to start the scan.
NOTE: This process may take several minutes depending on the scope of discovery.
5. (Optional) If the same array password is used for all the arrays to be added, you can specify it now in
the Password box.
6. Click Add to add all selected storage arrays to the MD vCenter Plug-in Array Manager.
7. Click the Close button to close the Discover Storage Arrays window when finished adding arrays.
Collect Support Bundle
The collect support bundle option performs an automatic collection of logs and configuration
information on your environment to be used by technical support to assist in problem resolution. To
generate a support bundle, perform the following task:
1. Select the target storage array in the right pane (table list).
2. Click the Collect Support Bundle icon. (This step may take some time.)
3. Your default browser should open a file save dialog.
4. Accept and complete the file download on the basis of your browser’s settings.
5. Click Close to finish the operation.
35