Users Guide

c. If the host group for the cluster already exists, select the host group name to add this host to.

Click Add Host button and enter the name for this ESXi host and select the check boxes next to

the HBAs to be used for the host definition.

Figure 17. Suggested ESXi host configuration

6. Select Next after completing manual configuration.

NOTE: Additional host configurations in a different host group from the previously defined host.

Figure 18. Manual add host dialog box

NOTE: The Configure ESXi Host to Storage Array wizard does not detect how the switch fabric

is zoned and suggested configurations are based on how the HBA ports are detected. The

suggested configuration may require the FC fabric to be rezoned based on the environment’s

cabling.