Users Guide

Figure 48. Select target virtual disk and priority
4. Select the copy priority to use while establishing the new virtual disk copy.
5. Click Next.
6. Review and verify the virtual disk copy settings and click Finish to start the virtual disk copy.
Stop Virtual Disk Copy
The Stop Virtual Disk Copy command stops the current virtual disk copy operation for the selected copy
pair. Select a copy pair that is in progress, and then click the Stop Virtual Disk Copy icon. A confirmation
message is displayed. Click OK.
Recopy
The Recopy command recopies all data from the source virtual disk to the target virtual disk, overwriting
any existing data on the target virtual disk, for the selected virtual disk copy pair.
All data available on the target virtual disk is overwritten with this option.
1. Select the virtual disk copy pair to use for the recopy.
2. Click Recopy.
3. Verify the information in the Recopy dialog box, and then click OK.
Change Settings
To change the target virtual disk to read-write or change the modification priority, perform the following
task:
1. Select an existing virtual disk copy pair from the list.
2. Click the Change Settings icon.
58