Users Guide

Delete Replication Group

You can also delete Remote Replication Groups after all replicated pairs have been removed from the

RRG. After you remove all of the replicated pairs, select the Delete Replication Group option from the

Actions drop-down menu.

Remote Replication Group

Removing a replicated pair breaks the relationship between the primary virtual disk and the secondary

virtual disk. Both virtual disks are return to standard virtual disk status. No data is deleted from either the

source virtual disk or the target virtual disk. To remove a replicated pair, perform the following task:

1. In the Remote Replication Group table, select the remote replication group from which to remove

the replicated pair.

2. Select the replicated pair to be removed from the Replicated Pairs table.

3. Select Remove Replicated Pair command from the Actions drop-down menu.

The Remove Remote Replicated Pair dialog box is displayed.

Figure 61. Remote Replication Group pair dialog box

4. Select Yes, I wish to perform the operation.

5. Click OK.

The replicated pair is removed from the Replicated Pairs table.

Remote Replication (Legacy) view features

When the Remote Replication (Legacy) premium feature is enabled on the storage array, the Remote

Replication (Legacy) tab appears in the MD vCenter Plug-in. From this tab, existing remote replication

(Legacy) pairs are displayed along with the Commands area, which allows the following commands:

• Create Remote Replication (legacy)

• Suspend remote replication (legacy)

• Resume remote replication (legacy)