Users Guide

Change Replication Settings
To modify the parameters of a replicated pair, such as the synchronization priority, the resynchronization
method, or the write mode, perform the following task:
1. Select the replicated pair to modify.
2. Select Change Replication (Legacy) Settings command from the Actions drop-down menu.
Figure 64. Change virtual disk copy parameters
3. Modify the displayed parameters as needed.
4. Click OK.
Change Replicated Roles
Changing replication roles makes the following role changes in the replicated pair:
• Promotes the secondary virtual disk to the primary virtual disk and allows read-write access to the
virtual disk from the remote location.
• Demotes the primary virtual disk to the secondary virtual disk and disables writes to the virtual disk
from the primary site.
To change replication roles, perform the following task:
1. Select the replicated pair in the Replicated Pairs window.
2. Select Change Replicated Roles from the Actions drop-down menu.
3. Click OK to change the replication roles or click Cancel to cancel the operation.
Test Replicated Communication
Testing replicated communication displays the round-trip times between the virtual disks in the
replicated pair. The times are displayed as average round-trip times, shortest round-trip times, and
longest round-trip times.
To test replicated communication, perform the following task:
73