Owner manual

Parameters
Parameter Description
repositoryRAIDLevel
The RAID level for the replication repository virtual disk.
Valid values are 1, 5, or 6.
repositoryPhysicalDisks
The physical disk for the replication repository virtual disk.
For high capacity physical disk enclosures, specify the
enclosure ID value, the drawer ID value, and the slot ID
value for each physical disk that you assign to the
replication repository virtual disk. For low capacity
physical disk enclosures, specify the enclosure ID value
and the slot ID value for each physical disk that you assign
to the replication repository virtual disk. Enclosure ID
values are 0 to 99. Drawer ID values are 0 to 4. Slot ID
values are 1 to 32. Enclose the enclosure ID values and
the slot ID values in parentheses.
repositoryDiskGroupUserLabel
The alphanumeric identifier (including - and _) that you
want to give the new disk group in which the replication
repository virtual disk is located. Enclose the disk group
identifier in square brackets ([ ]).
repositoryDiskGroup
The name of the replication repository disk group where
the replication repository virtual disk is located. (To
determine the names of the disk groups in your storage
array, run the show storageArray profile
command.)
physicalDiskMediaType
The type of physical disk media that you want to use for
the replication repository disk group. Valid physical disk
media are these:
• HDD – Use this option when you have hard disk
drives in the expansion enclosure.
• SSD – Use this option when you have solid state
physical disks in the expansion enclosure.
• unknown – Use if you are not sure what types of
physical disk media are in the expansion
enclosure.
• allMedia - Use this option when you want to use
all types of physical disk media that are in the
expansion enclosure.
Use this parameter when you use the
repositoryPhysicalDiskCount parameter.
You must use this parameter when you have more than
one type of physical disk media in your storage array.
freeCapacityArea
The index number of the free space in an existing disk
group that you want to use to create the replication
repository virtual disk. Free capacity is defined as the free
capacity between existing virtual disks in a disk group. For
130