Owner manual

Clear Remote Replication Fault
Description
This command clears a remote replication "sticky" fault from one or more remote replication groups and one or more
remote replication group member virtual disks.
A remote replication group and its member virtual disks can encounter remote replication "sticky" faults, which occur at
a single point-in-time but do not impact the functionality of the replications. These type of faults must be reviewed, but
do not require any changes to the configuration.
A remote replication group and its member virtual disks can have more than one associated “sticky” fault. This
command clears all of the faults associated with the remote replication group and its member virtual disk. However, if a
remote replication group has a fault and one of its member virtual disks has a fault, clearing the fault on the remote
replication group does not clear the fault on its member virtual disk.
Syntax
clear asyncRemoteReplicationFault(all | asyncRemoteReplicationGroup ["
asyncRemoteReplicationGroupName"] |
asyncRemoteReplicationGroups ["asyncRemoteReplicationGroupName1" ...
"asyncRemoteReplicationGroupNameN"] |
virtualDisk ["virtualDiskName"] | virtualDisks ["virtualDiskName1" ...
"virtualDiskNameN"])
Parameters
Parameter Description
all
Use this parameter if you want to clear all remote
replication faults from all remote replication groups and
on all remote replication group member virtual disks.
asyncRemoteReplicationGroup
The name of the remote replication group from which you
want to clear the remote replication fault. Enclose the
remote replication group name in square brackets ([ ]). If
the remote replication group name has special
characters, you also must enclose the remote replication
group name in double quotation marks (" ").
asyncRemoteReplicationGroups
The names of several remote replication groups from
which you want to clear the remote replication fault. Enter
the names of the remote replication groups using these
rules:
• Enclose all of the names in square brackets ([ ]).
• Enclose each of the names in double quotation
marks (" ").
• Separate each of the names with a space.
virtualDisk
The name of the specific member virtual disk (in a remote
replication group) from which you want to clear the
145