Owner manual

Convert Snapshot (Legacy) Virtual Disk To Snapshot Group
Description
This command migrates a snapshot (legacy) virtual disk to a snapshot group and converts an existing snapshot (legacy)
repository virtual disk to a snapshot image repository virtual disk. A maximum of four snapshots (legacy) can be
converted to a snapshot group. None of the snapshots (legacy) can be in a disabled state or involved in an in-progress
virtual disk copy operation. If the base virtual disk has more than four snapshots (legacy), you must delete the extra
snapshots before running this command.
Syntax
convert snapshotVirtualDisk baseVirtualDisk="baseVirtualDiskName"
Parameter
Parameter Description
baseVirtualDisk
The alphanumeric identifier (including - and _) of the base
virtual disk that has the snapshots (legacy) that you want
to convert into a snapshot group. Enclose the base virtual
disk name in double quotation marks (" ").
Create Consistency Group
NOTE: This command does not apply to the snapshot (legacy) commands.
Description
This command creates a new, empty consistency group that can contain snapshot groups. You must add the snapshot
groups using the set consistencyGroup addCGMember command.
Syntax
create consistencyGroup userLabel="consistencyGroupName"
[repositoryFullPolicy=(failBaseWrites repositoryFullLimit=percentValue |
autoDeleteLimit=numberOfSnapImages |
enableSchedule=(TRUE | FALSE) |
schedule (immediate |
snapSchedule) |
rollbackPriority=(lowest | low | medium | high | highest)]
151