Owner manual

Parameter Description
warningThresholdPercent
The percentage of repository capacity at which you
receive a warning that the snapshot (legacy) repository is
nearing full. Use integer values. For example, a value of
70 means 70 percent. The default value is 50.
repositoryPercentOfSource
The size of the snapshot (legacy) repository virtual disk as
a percentage of the source virtual disk. Use integer
values. For example, a value of 40 means 40 percent. The
default value is 20.
repositoryUserLabel
The name to give to the snapshot (legacy) repository
virtual disk. Enclose the snapshot (legacy) repository
virtual disk name in double quotation marks (" ").
repositoryFullPolicy
Specifies how snapshot (legacy) processing continues if
the snapshot (legacy) repository is full. You can choose to
fail writes to the base virtual disk (failBaseWrites) or
fail the snapshot (legacy) virtual disk (failSnapShot).
The default value is
failSnapShot.
enableSchedule
Turns on or off the ability to schedule a snapshot (legacy)
operation. To turn on snapshot (legacy) scheduling, set
this parameter to TRUE. To turn off snapshot (legacy)
scheduling, set the parameter to FALSE.
schedule
Use this parameter to schedule a snapshot (legacy)
operation.
You can use one of these options for setting a schedule
for a snapshot (legacy) operation:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• noEndDate
• timesPerDay
• timeZone
NOTE: For more information, see Notes below.
Notes
The virtual disk that you are taking a snapshot (legacy) of must be a standard virtual disk in the storage array. The
maximum number of snapshot (legacy) virtual disks that you can create is one-half of the total number of virtual disks
that are supported by a RAID controller module.
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the names.
Names can have a maximum of 30 characters.
185