Owner manual

Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of the
snapshot group that you want to delete. Enclose the
snapshot group identifier in double quotation marks (" ")
inside square brackets ([ ]).
deleteRepositoryMembers
The parameter to save or delete the member virtual disks.
To save the member virtual disks, set this parameter to
FALSE. To delete the member virtual disks, set this
parameter to TRUE. The default value is FALSE.
Notes
You can delete a snapshot group if it is empty or if it contains snapshot images. All of the snapshot images in the
snapshot group are deleted along with the snapshot group. If any existing snapshot image within the snapshot group
has an associated view, each view is stopped and detached from the snapshot image. When you delete a snapshot
group the associated repository virtual disk is also deleted. By default, all member virtual disks in the repository virtual
disk are retained as unused, unmapped standard virtual disks. To remove the member virtual disks set the
deleteRepositoryMembers parameter to TRUE, or do not use this parameter. To keep the member virtual disks,
set the deleteRepositoryMembers parameter to FALSE.
Delete Snapshot Image
Description
This command deletes one or more snapshot images from a snapshot group.
Syntax
delete snapImage (snapGroup="snapshotGroupName" |
snapGroups=("snapshotGroupName1"... "snapshotGroupNamen"))
(deleteCount=
numberOfSnapshotImages |
retainCount=numberOfSnapshotImages |
ignoreSnapVirtualDisk=(TRUE | FALSE) |
snapImageID=OLDEST)
Parameters
Parameter Description
snapGroup or snapGroups The name of the snapshot group that has the snapshot
image that you want to delete. Enclose the name of the
snapshot group in double quotation marks (" "). If you enter
more than one snapshot group name, enclose each of the
200