Owner manual

Parameters
Parameter Description
physicalDisk
Physical disk to which to download the firmware image.
Specify the enclosure ID and slot ID for the physical disk.
Enclosure ID values are 0 to 99. Slot ID values are 0 to
31. You must put brackets ([ ]) around the enclosure ID
value and slot ID value.
filename
File path and file name of the file that contains the
firmware image. You must put quotation marks (" ") around
the firmware image file path and file name.
Download Storage Array Firmware/NVSRAM
Description
This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array.
If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command.
Syntax
download storageArray firmware [, NVSRAM]
file="filename" [, "NVSRAM-filename"]
[downgrade=(TRUE | FALSE)]
[activateNow=(TRUE | FALSE)]
Parameters
Parameter Description
NVSRAM
Specifies that you want to download a file with NVSRAM
values when you download a firmware file. You must not
put brackets around this parameter. Include a comma
after the term firmware.
file
File path and name of the file that contains the firmware.
Valid file names must end with a .dlp extension. You must
put quotation marks (" ") around the file name.
NVSRAM-filename
File path and name of the file that contains the NVSRAM
values. Valid file names must end with a .dlp extension.
You must put quotation marks (" ") around the NVSRAM file
name. You must include a comma after the firmware file
name.
downgrade
Specifies that you are loading firmware that is a previous
version. The default value is FALSE. Set downgrade to
213