Owner manual

Parameters
Parameter Description
snapVirtualDisk
The name of the snapshot virtual disk that you want to
rename. Enclose the snapshot virtual disk name in double
quotation marks (" ") inside of square brackets ([ ]).
userLabel
A new name that you want to give to the snapshot virtual
disk. Enclose the new snapshot virtual disk name in
double quotation marks (" ").
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the names.
Names can have a maximum of 30 characters.
Rename SSD Cache
Description
This command changes the name of the SSD cache.
Syntax
set ssdCache [old_ssdCacheName] userLabel="new_ssdCacheName"
Parameters
Parameter Description
ssdCache
The alphanumeric identifier (including - and _) of the SSD
cache that you want to rename. Enclose the identifier in
square brackets ([ ]). If the SSD cache name contains
special characters or consists only of numbers, you also
must enclose the identifier in double quotation marks (" ")
inside square brackets.
userLabel
The new name for the SSD cache. Enclose the name in
double quotation marks (" ").You can use any combination
of alphanumeric characters, underscore (_), hyphen (-),
and pound (#) for the identifier. Identifiers can have a
maximum of 30 characters.
234