Owner manual

Reset Storage Array Virtual Disk Distribution
Description
This command reassigns (moves) all virtual disks to their preferred RAID controller module.
Syntax
reset storageArray virtualDiskDistribution
Parameters
None.
CAUTION: Ensure that the multipath driver is running before you use this command, or the virtual disk is not
accessible.
NOTE: Under certain host operating system environments, you might be required to reconfigure the multipath host
physical disk. You might also need to make operating system modifications to recognize the new I/O path to the
virtual disks.
Resume Consistency Group Snapshot Virtual Disk
Description
This command restarts a copy-on-write operation for creating a consistency group snapshot virtual disk that you
stopped using the stop cgSnapVirtualDisk command.
Syntax
resume cgSnapVirtualDisk ["snapVirtualDiskName"]
cgSnapImage="
snapImageName"
Parameters
Parameter Description
cgSnapVirtualDisk
The name of the consistency group snapshot virtual disk
for which you want to restart a rollback operation. Enclose
the name of the consistency group snapshot virtual disk in
double quotation marks (" ") inside square brackets ([ ]).
cgSnapImage
The name of the snapshot image in a consistency group
that you are restarting. The name of a snapshot image is
comprised of two parts:
• The name of the consistency group.
• An identifier for the snapshot image in the
consistency group.
241