Owner manual

Parameter Description
• errors—Statistics are recorded for the most
recent 20 failed resynchronization samples. These
samples include a failure code.
recordLimit
This parameter is optional. The default value for record
limit is no limit. The recordLimit must be greater
than 0 and less than or equal to 90.
Notes
Statistics are captured for replicated virtual disks in the Primary role. The statistics collected include the following data:
• Synchronization start time
• Synchronization type (manual or periodic)
• Synchronization duration
• Number of bytes sent
• Maximum write time (for a single write)
• Minimum write time (for a single write)
• Minimum synchronization data rate
• Maximum synchronization data rate
• Total write time
• Repository utilization (%)
• Recovery point age
During initial synchronization, statistics samples are captured approximately every 15 minutes.
The synchronization statistics are included in the support bundle.
Save Storage Array Configuration
Description
This command creates a script file that you can use to create the current storage array virtual disk configuration.
Syntax
save storageArray configuration file="filename"
[(allConfig | globalSettings=(TRUE | FALSE) virtualDiskConfigAndSettings=(TRUE
| FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
253