Owner manual

Parameters
Parameter Description
file
Name of the file that contains the configuration values.
You must put quotation marks (" ") around the file name.
allConfig
Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration parameters
are set to TRUE.)
globalSettings
Saves the global settings to the file. To save the global
settings, set this parameter to TRUE. To prevent saving
the global settings, set this parameter to FALSE. The
default value is
TRUE.
virtualDiskConfigAndSettings
Saves the virtual disk configuration settings and all of the
global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration and
global settings, set this parameter to FALSE. The default
value is
TRUE.
hostTopology
Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is
FALSE.
lunMappings
Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to TRUE. To prevent saving
the LUN mapping, set this parameter to FALSE. The
default value is
FALSE.
NOTE: When you use this command, you can specify any combination of the parameters for global setting, virtual
disk configuration setting, host topology, or LUN mapping. To enter all settings, use the allConfig parameter.
The parameters are optional; you do not have to enter any parameters.
Save Storage Array Core Dump
Description
This command saves a core dump to a specified file on a host.
Syntax
save storageArray coreDump file="filename"
254