Owner manual

Parameter Description
• If the parameter is set to all, all data that resides
in the database will be retrieved. This includes
disk group and disk pool configuration.
The default is raidConfiguration.
file
The file path and the file name to which you want to save
the database. Enclose the file name in double quotation
marks (" "). For example: file="C:\Program Files
\CLI\logs \events.txt".
This parameter must appear last, after any of the optional
parameters.
This command does not automatically append a file
extension to the saved file. You must specify a file
extension when entering the file name.
Notes
The data that you save to the host using this command can, if needed, be restored to the RAID controller module. A
validator, however, is required to restore data from the file on the host.
Save Storage Array DBM Validator Information File
Description
This command saves the database management (DBM) validation information for a storage array in an XML file. Support
personnel can use this XML file to generate a validator string (a security code). The validator string must be included in
the load storageArray dbmDatabase command when restoring a storage array back to a pre-existing
configuration.
Syntax
save storageArray dbmValidatorInfo file="filename" dbmDatabase="filename"
Parameters
Parameter Description
file
The file path and the file name of the DBM validator.
Enclose the file name in double quotation marks (" "). For
example: file="C:\Array Backups \DBMvalidator.xml". This
command does not automatically append a file extension
to the saved file. You must specify the .xml file extension
when you enter the file name.
dbmDatabase
The file path and the file name of the DBM database from
which you want to generate the XML information file.
Enclose the file name in double quotation marks (" "). For
256