Owner manual

[startTime=HH:MM]
[startDate=MM:DD:YY]
[endDate=MM:DD:YY]
(daysOfWeek={} | months={}
(onDays={} |
weekNumber=(First|Second|Third|Fourth|Last) dayOfWeek=(Sunday|Monday|Tuesday|
Wednesday|)
Parameters
Parameter Description
enable
Enable automatic collection of support bundles when a
critical MEL event is detected.
disable
Disable automatic collection of support bundles where the
feature was previously enabled.
all
Apply the command to all storage arrays detected from
the host.
storageArrayName
Apply the command to the named storage array.
data
Store the data generated by the command at the location
specified by the pathName .
Scheduling Snapshots
NOTE: This command is applicable to both the Snapshot and the Snapshot (Legacy) premium feature.
Description
You can use the enableSchedule and the schedule parameters to schedule automatic snapshots. Automatic
snapshots can be scheduled daily, weekly, or monthly (by day or by date). The enableSchedule parameter turns on
or off the ability to schedule snapshots. When you enable scheduling, you use the schedule parameter to define when
you want the snapshots to occur.
Parameters
Parameter Description
immediate
Begins a snapshot operation immediately; a snapshot
virtual disk is created and a copy-on-write operation
begins.
startDate
Defines a specific start date snapshot virtual disk
creation. The format for this option is MM:DD:YY. If no
start date is provided, the current date is used. For
example: startDate=06:27:11.
scheduleDay
Defines a day of the week you want to create a snapshot
virtual disk and perform a copy-on-write operation. The
values that you can enter are: monday, tuesday,
262