Owner manual

Parameter Description
snapshot images for a repository full policy. The default
value is 32.
rollBackPriority
The priority for rollback operations for a consistency
group while the storage array is operational. Valid values
are highest, high, medium, low, or lowest.
Set Consistency Group Snapshot Virtual Disk
Description
This command creates a unique name for a snapshot virtual disk of a consistency group.
Syntax
set cgSnapVirtualDisk [consistencyGroupName]
userLabel="snapVirtual DiskName"
Parameters
Parameter Description
cgSnapVirtualDisk
The name of the consistency group virtual disk that you
want to rename. Enclose the name of the consistency
group snapshot virtual disk in square brackets ([ ]).
userLabel
The new name that you want to give to the snapshot
virtual disk in the consistency group. Enclose the new
snapshot virtual disk name in double quotation marks (" ").
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the names.
Names can have a maximum of 30 characters.
Set Disk Group
Description
This command defines the properties for a disk group.
Syntax
set diskGroup [diskGroupName]
addPhysicalDisks=(enclosureID1,slotID1 enclosureID2,slotID2...
enclosureIDn,slotIDn)
265