Owner manual

Parameter Description
firmware for the RAID controller module returns a syntax
error.
availability
The mode for the RAID controller module, which you can set
to online, offline, or serviceMode (service).
ethernetPort
The attributes (options) for the management Ethernet ports.
The entries to support this parameter are listed in the Syntax
Element Statement Data table that follows. Many settings
are possible, including setting the IP address, the gateway
address, and the subnet mask address.
globalNVSRAMByte
A portion of the RAID controller module NVSRAM. Specify
the region to be modified using the starting byte offset within
the region and the size and value of the new data to be
stored into the NVSRAM.
hostNVSRAMByte
The NVSRAM for the host-specific region. The setting
specifies the host index for the specific host, the starting
offset within the region, the number of bytes, and the values
to be written.
IPv4GatewayIP
The IP address of the node that provides the interface to the
network. The address format for the IPv4 gateway is (0–255).
(0–255).(0–255).(0–255).
IPv6RouterAddress
The IP address of IPv6 router that connects two or more
logical subnets. The address format for the IPv6 router is (0–
FFFF):(0–FFFF):(0–FFFF):(0– FFFF): (0–FFFF):(0–FFFF):(0–FFFF):
(0– FFFF).
iscsiHostPort
The values that support this parameter are listed in the
Syntax Element Statement Data table that follows. Many
settings are possible, including setting the IP address, the
gateway address, the subnet mask address, the IPv4 priority,
and the IPv6 priority.
rloginEnabled
The setting for whether the remote login feature is turned on
or turned off. To turn on the remote login feature, set this
parameter to TRUE. To turn off the remote login feature, set
this parameter to FALSE.
serviceAllowedIndicator
The setting for whether the Service Action Allowed indicator
light is turned on or turned off. To turn on the Service Action
Allowed indicator light, set this parameter to on. To turn off
the Service Action Allowed indicator light, set this parameter
to off.
278