Owner manual

Syntax
set snapGroup ["snapGroupName"]
enableSchedule=(TRUE | FALSE)
schedule=(immediate |
snapshotSchedule)
Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of the
snapshot group for which you are setting properties.
Enclose the snapshot group name in double quotation
marks (" ") inside of square brackets ([ ]).
enableSchedule
Use this parameter to turn on or to turn off the ability to
schedule a snapshot operation. To turn on snapshot
scheduling, set this parameter to TRUE. To turn off
snapshot scheduling, set this parameter to FALSE.
schedule
Use this parameter to schedule a snapshot group
operation.
You can use one of these options for setting a schedule
for a snapshot group operation:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• noEndDate
• timesPerDay
• timeZone
NOTE
: For more information on how to schedule snapshots, see Scheduling Snapshots
Set Snapshot (Legacy) Virtual Disk
Description
This command defines the properties for a snapshot virtual disk and lets you rename a snapshot virtual disk.
Syntax
set (virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ...
virtualDiskNameN])
userLabel=”snapshotVirtualDiskName”
warningThresholdPercent=
percentValue
290