Owner manual

Syntax
set storageArray isnsIPv6Address=ipAddress
Parameter
Parameter Description
isnsIPv6Address
The IPv6 address that you want to use for the iSNS server.
Set Storage Array iSNS Server Listening Port
Description
This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort=listeningPortIPAddress
Parameter
Parameter Description
isnsListeningPort
The IP address that you want to use for the iSNS server
listening port. The range of values for the listening port is
49152 to 65535. The default value is 3205.
Additional Information
A listening port resides on the database server and is responsible for these activities:
• Listening (monitoring) for incoming client connection requests
• Managing the traffic to the server
When a client requests a network session with a server, a listener receives the actual request. If the client information
matches the listener information, then the listener grants a connection to the database server.
Set Storage Array Learn Cycle
Description
This command sets the learn cycle for the battery backup unit. The learn cycle enables the MD storage management
software to predict the remaining battery life. Learn cycles run at set intervals and store the results for
software analysis.
300