Owner manual

Recurring Syntax Syntax Value
create-raid-vol-attr-value-list create-raid-virtual disk-attribute-valuepair
{ create-raid-virtual disk-attribute-valuepair }
create-raid-virtual disk-attribute-value-pair capacity= capacity-spec | owner=(0 | 1) |
segmentSize= integer-literal
RAID controller module-enclosureId (0–99)
slot-id (0–31)
port-id (0–127)
physical disk-spec enclosureID, slotID
physical disk-spec-list physical disk-spec { physical disk-spec }
enclosure-id-list enclosureID { enclosureID }
hex-literal 0x hexadecimal-literal
virtual disk-group-number integer-literal
filename string-literal
error-action (stop | continue)
physical disk-channel-identifier (1 | 2)
physical disk-channel-identifier-list physical disk-channel-identifier { physical disk-channel-
identifier }
host-channel-identifier (01 | 02 | 11 | 12)
physical disk-type (Serial Attached SCSI [SAS])
feature-identifier (snapshot | virtualDiskCopy)
repository-spec instance-based-repository-spec | count-based-repository-
spec
ethernet-port-options IPV4Address= ipv4-address |
IPV4ConfigurationMethod=[ (static | dhcp) ] |
IPV4GatewayIP= ipv4-address |
IPV4SubnetMask= ipv4-address |
iscsi-host-port-options IPV4Address= ipv4-address |
IPV6LocalAddress= ipv6-address |
IPV6RoutableAddress= ipv6-address |
IPV6RouterAddress= ipv6-address |
enableIPV4= boolean |
enableIPV6= boolean |
enableIPV4Vlan= boolean |
enableIPV6Vlan= boolean |
enableIPV6Priority= boolean |
enableIPV6Priority= boolean |
IPV4ConfigurationMethod=( static | dhcp ) |
IPV6ConfigurationMethod=( static | auto ) |
31