Owner manual

Associated base volume: 2
Cluster size: 65,536 bytes
Repository
Total repository volumes: 3
Aggregate repository status: Optimal
Total repository capacity: 10.318 GB
Used capacity: 0.000 MB (0%)
Available repository capacity: 10.318 GB (100%)
Repository full policy: Auto-purge Snapshot Images
Utilization alert threshold: 75%
Snapshot images
Total Snapshot images: 0
Auto-delete Snapshot images: Disabled
Snapshot image schedule: Not Applicable
Show Snapshot Image
Description
This command returns information about the snapshot images that a user had previously created.
Syntax For Showing A Specific Snapshot Image
show (snapImage ["snapImageName"] |
snapImages ["snapImageName1 ... snapImageNamen"] |
allSnapImages])
[summary]
Parameters
Parameter Description
snapImage or snapImages The name of the snapshot image. The name of a snapshot
image is comprised of two parts:
• The name of the snapshot group.
• An identifier for the snapshot image in the
snapshot group.
The identifier for the snapshot image can be one of these:
• An integer value that is the sequence number of
the snapshot in the snapshot group.
• NEWEST - Use this option when you want to show
the latest snapshot image created in the snapshot
group.
• OLDEST - Use this option when you want to show
the earliest snapshot image created in the
snapshot group.
Enclose the snapshot image name in double quotation
marks (" ") inside square brackets ([ ]).
You can enter more than one snapshot name or sequence
number. Enclose all of the snapshot names in one set of
328