Owner manual

Syntax
show storageArray lunMappings [host ["hostName"] |
hostgroup ["
hostGroupName"]]
Parameters
Parameter Description
host
Name of a specific host for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host name. The host name and quotation
marks must be inside the brackets.
hostGroup
Name of a specific host group for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host group name. The host group name
and quotation marks must be inside the brackets.
Show Storage Array Negotiation Defaults
Description
This statement returns information about connection-level settings that are subject to initiator-target negotiation.
Syntax
show storageArray iscsiNegotiationDefaults
Parameters
None.
NOTE: Information returned includes RAID controller module default settings (settings that are the starting point for
negotiation), and the current active settings.
Show Storage Array Unconfigured iSCSI Initiators
Description
This command returns a list of initiators that have been detected by the storage array but are not yet configured into the
storage array topology.
Syntax
show storageArray unconfiguredIscsiInitiators
339