Owner manual

NOTE: You must enclose the string in double quotation marks (“ ”).
Show Thin Virtual Disk
Description
This command returns the expansion history or the consumed capacity for the specified thin virtual disk or virtual disks.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ... virtualDiskNameN])
(consumedCapacity | (expansionHistory [file=
fileName]))
Parameters
Parameter Description
allVirtualDisks
The setting to return information about all of the virtual
disks in the storage array.
virtualDisk or virtualDisks The name of the specific virtual disk for which you are
retrieving information. You can enter more than one virtual
disk name. Enclose the virtual disk name in square
brackets ([ ]). If the virtual disk name has special
characters, you also must enclose the virtual disk name in
double quotation marks (" ").
consumedCapacity
The setting to return a concise list of information about the
consumed capacity of the thin virtual disks.
expansionHistory
The setting to return a concise list of information about the
expansion history of the thin virtual disks.
file
The file parameter specifies a file to log the output of
the expansionHistory parameter. The file is valid
only when used with the
expansionHistory
parameter. An invalid file name causes the command to
fail.
Notes
With the expansionHistory parameter, the command returns information similar to the example shown below.
Thin virtual disk name: virtual disk-nameRepository virtual disk Name:
REPOS_NNNN
Logged Time Expansion Type Start Capacity End Capacity
MM/DD/YYYY
HH:MM:SS
Manual|Automatic NNNNNNNN bytes NNNNNNNN bytes
With the
consumedCapacity parameter, the command returns information similar to the example shown below.
341