Owner manual

Parameters
Parameter Description
allvirtualDisks
The setting to return performance statistics about all of
the virtual disks in the storage array.
virtualDisk or virtualDisks
Name of the source virtual disk for which you are trying to
find a candidate target virtual disk. You must put quotation
marks (" ") and brackets ([ ]) around the source virtual disk
name. The source virtual disk name and quotation marks
must be inside the brackets.
Show Virtual Disk Reservations
Description
This command returns information about the virtual disks that have persistent reservations.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName]
|
virtualDisks [virtualDiskName1... virtualDiskNameN] reservations
Parameters
Parameter Description
allVirtualDisks
Returns reservation information about all virtual disks in
the storage array.
virtualDisk or virtualDisks
Name of the specific virtual disk for which you are
retrieving reservation information. You can enter more
than one virtual disk name. You must put brackets ([ ])
around the virtual disk name. If the virtual disk name has
special characters, you must also put quotation marks (" ")
around the virtual disk name.
Start Configuration Database Diagnostic
Description
This command starts a diagnostic test to validate the configuration database in the controller firmware.
Syntax
start storageArray configDbDiagnostic
346