Owner manual

Syntax
stop physicalDisk blink
Parameters
None.
Stop Physical Disk Channel Blink
Description
This command turns off the indicator lights on the expansion enclosures that were turned on by the start
physicalDiskChannel blink
command.
Syntax
stop physicalDiskChannel blink
Parameters
None.
Stop Physical Disk Channel Fault Isolation Diagnostics
Description
This command stops the physical disk port fault isolation diagnostics, which stops the start physicalDisk
channel fault isolation diagnostics
command before it completes.
Syntax
stop physicalDiskChannel faultDiagnostics
Parameters
None.
NOTE: Use the start physicalDiskChannel faultDiagnostics command and the save
physicalDiskChannel faultDiagnostics
command with the stop physicalDiskChannel
faultDiagnostics command. These commands are needed to start the diagnostic test and save diagnostic
test results to a file. You can also stop the start physicalDiskChannel faultDiagnostics
command at any time by pressing <Ctrl><C>.
366