Owner manual

snapshot (legacy) virtual disk name that the RAID controller modules might create is, if the base virtual disk name is aaa
and does not have a snapshot (legacy) virtual disk, the default snapshot (legacy) virtual disk name is aaa-1. If the base
virtual disk already has n -1 number of snapshot (legacy) virtual disks, the default name is aaa- n . An example of the
snapshot (legacy) repository virtual disk name that the RAID controller module might create is, if the base virtual disk
name is aaa and does not have a snapshot (legacy) repository virtual disk, the default snapshot (legacy) repository
virtual disk name is aaa- R1. If the base virtual disk already has n -1 number of snapshot (legacy) repository virtual disks,
the default name is aaa-R n .
Stop Snapshot (Legacy) Rollback
Description
This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk
command.
NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with potentially invalid
or inconsistent data. The related snapshot virtual disk becomes disabled and unusable.
Syntax
stop rollback virtualDisk [snapshotVirtualDiskName]
Parameters
Parameter Description
virtualDisk
Names the specific snapshot virtual disk for which you
want to resume a rollback operation. Enclose the
snapshot virtual disk name in square brackets ([ ]). If the
snapshot virtual disk name has special characters, you
must also enclose the snapshot virtual disk name in
double quotation marks (" ").
Stop Snapshot Rollback
Description
This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk command.
NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with potentially invalid
or inconsistent data. The related snapshot virtual disk becomes disabled and unusable.
Syntax
stop rollback virtualDisk [snapshotVirtualDiskName]
369