Owner manual

Parameters
None.
Stop Virtual Disk Copy
Description
This command stops a virtual disk copy operation.
Syntax
stop virtualDiskCopy target [targetName] [source [sourceName]]
Parameters
Parameter Description
target
Name of the target virtual disk for which to stop a virtual
disk copy operation. You must put brackets ([ ]) around the
target virtual disk name. If the target virtual disk name has
special characters, you must also put quotation marks (" ")
around the target virtual disk name.
source
Name of the source virtual disk for which to stop a virtual
disk copy operation. You must put brackets ([ ]) around the
source virtual disk name. If the source virtual disk name
has special characters, you must also put quotation marks
(" ") around the source virtual disk name.
Suspend Remote Replication
Description
This command suspends a Remote Replication operation.
NOTE: This command is valid only with Fibre Channel storage arrays.
Syntax
suspend remoteReplication (primary
[
primaryVirtualDiskName] |
primaries [primaryVirtualDiskName1 ...
primaryVirtualDiskNameN])
writeConsistency=(TRUE | FALSE)
375